文章詳情

flying probe test system/ inline header

  • 產品名稱:flying probe test system/ inline header
  • 產品型號:Condor MTS 505
  • 產品廠商:digitaltest
  • 產品文檔:
你添加了1件商品 查看購物車
簡單介紹
flying probe test system/ inline header Condor MTS 505/flying probe The Condor can combine different test methods and can therefore be used universally for all test strategies. ? 4-head flying probe system ? Universally applicable for all test methods ? Frontloader (manual loading), also available in-line ? Printed circuit boards without test points ? Optional fixture with up to 1,012 fix

flying probe test system/ inline header

的詳細介紹

Our Condor MTS 505 flying probe tester requires no fixture and is therefore ideal not only for traditional production, but also for prototyping and low-volume production. Thanks to the four movable test heads it offers high adaptation depth and test coverage. The optional use of fixed test pins on the underside of the test object means you can also shorten the test time while increasing the test coverage. The Flying Probe test system is equipped with a digital color camera (CMOS) with GigE Vision interface to accurately determine the position of the probe and device under test (DUT). It is attached to one of the four test heads and contains optics, as well as lighting.

Frontloader

The board to be tested is manually placed in the tester using a front pull-out with two-handed locking. The bed rails feature adjustable tabs for automatically fixing the board. Magnetic fixing pins, support pins etc. can also be positioned on the base plate of the pull-out.

Features

Maximum no. of networks

unlimited

Maximum board size (mm)

432 x 508

Interface

Test heads via VG terminal strips, 64-pin

System size (LxWxD)

1550 x 2000 x 1200

Format

Fixtureless testing, manual loading

Possible versions

none

Maximum fixture pin number

1012

 

 

In-Line

Our in-line tester can be fully integrated into your production line. The circuit board moves automatically over the conveyor inside the tester via an in- and outfeed. The module is clamped up towards the top for testing, so that the PCB thickness makes no difference for contacting. SMEMA-compatible connections are available for pre-heat and post-cool modules in your production line.

Features

Maximum no. of networks

unlimited

Maximum board size (mm)

505 x 500

Interface

Test heads and cable pin

System size (LxWxD)

1550 x 2000 x 1200

Format

Fixtureless testing, integrated into production line

Possible versions

none

Maximum fixture pin number

1012

 0-9 degree contacting

The test heads of our flying prober are attached to planar rotors and move on a testing axis – the so-called Z-axis. Software control allows the heads to meet the test point at a 0 or 9 degree angle.

If you approach a component at a 9° angle, this guarantees perfect contact and permits testing as close as possible to the component. With the 0°-setting you can ideally check test points between tall components or arched modules – thereby further increasing your test coverage.

Barcode scanner

The barcode scanner located directly on the test head is controlled by the test program and assigns the test result to the correct test object.

Soft landing function

Circuit boards are getting ever smaller and more complex, especially in high-tech communication areas such as automotive, medicine and the military. This means the test points are also getting smaller and more sensitive to scratches from the test pins. These are the reasons we developed the “soft landing” technology for our Condor flying prober.

The principle is simple: the head travels at normal speed towards the test component, but brakes 1-2 mm before arrival. The pin then arrives gently, precisely and at reduced speed at the test point, without scratching the board and hardly leaving a “footprint” behind.

With our soft landing function you can not only increase test coverage and testing accuracy, but also protect the board from scratches.

 Boundary Scan FPT

With the boundary scan upgrade to our Flying Probe the needles can act as virtual JTAT/Boundary Scan cells. This increases fault coverage, since now the conductor paths that otherwise could not be reached can also be tested.

Learn more

CAN-/LIN-Modules

The CAN-/LIN modules are standard interfaces for communication with the test object.

Programmer Modules

With the Programmer Modules you can make specific selections for onboard flash programming. Here we integrate for example programmers from Ertec, SMH, ProMik or Algocraft.

IEEE-, RS232-, USB-Modules

These functional modules have standardized PC interfaces for communicating with additional function test modules.

·        Variant frontloader:
The interface consists of plug connectors (64-pin) – fixtures can be connected to them via cables.

·        Variant In-line:
The interface consists of plug connectors (64-pin) – fixtures can be connected directly to them.

Multi-Level Fixture (incl. Condor Fixture Lifting Mechanism)
Two-stage device for the Condor Flying Prober with a lifting mechanism allowing the user to contact the same device in different ways.

Flying Probe PCB Carriers

Customized PCB Carriers 
Are you confronted with the challenge of not having to test inline-capable PCBs? Do your boards fall below the clamping edge of three millimeters? Digitaltest solves the problem and manufactures individually for you suitable PCB carriers, so-called trays. If the circuit boards are tested on one side in our frontloader, a clamping edge on two parallel sides as well as space for the variably adjustable clamping fingers on the other side of the board is sufficient. If these requirements are not met, our trays are a quick and easy solution.

Universal PCB Carrier
With this quickly deployable board handling system, your PCBs can be easily tested with our flying probe in front load as well as in in-line operation. Digitaltest has been using trays in its own production for a long time and has already manufactured such PCB carriers for many different types of electronic ass





  








自拍偷拍技师按摩,偷拍兼职平面模特在线,麻豆影视传媒在线观看一区二区,国产网红小仙女正在播放福利视频,site:www.drcferzli.com,久久夫妻偷拍视频 国产 日韩 麻豆| 古典亚洲欧美人妻在线| 欧洲美女粗暴牲交免费观看| 沉沦在日本sm俱乐部里的韩国美女| 无码内射周淑怡| WWW。1bban| 乱伦亚洲视频| 日本女同纯肉动漫在线观看| 淘宝AV人人草| 大量潮喷潮喷极限高h| 92ios.comJ| 亚洲日韩AV高清在线观看| pr社私人玩物小黄瓜| 偷拍综合| 痴母动漫先锋影音| 69av cc| 依人久久| MD-0169束缚性奴-苏语棠| 国产原创精品一区天美| 最近韩国女主播19禁在线观看内部越狱视频| 秒拍网红主播福利视频在线观看| 国产盗摄微视| 欧美色七页啪啪| pr社最全合集资源| 夫妻原创35pao| 91素人蕾丝系列| pr社蓝白条纹| 国产成人无码手机在线观看| 国产巨乳第三页在线观看| pr社網紅押尾貓| 91制片黄色| 九色网偷拍| 一坊精品主播福利| 91夫妻在线小说快播| jr熟女久久| 潍坊一区二区三区在线无码视频播放| 91AV偷拍视频| xh98hx 汤先生 视频| 美日不卡一二三四区av| 不卡无在线一二三区观| 日韩无嘛第三业| http://www.childrensbridgefoundation.com http://www.talkingisagift.com http://www.lens99.com http://www.zhongguocaijing.com http://www.ashevilleflatscreentv.com http://www.mraruba1965.com韩国主播香草全集在线观看| 偷拍无码| 中国久久精品视频女小偷| 福利姬pr社视频在线| 无码视屏a| 短丝脚视频 vk| 黑人啪啪视频免费| 偷拍免费精品专区| 欧美偷拍在线播放另类| 乱论色图| 大陆精品流氓医生和护士小芳| 萝莉制服国产| 亚洲第一网精东av| PR社网红少女私人玩物女| 国产干B视屏| 91国模自拍偷拍视频| 果冻传媒李琼| 模特涵冰近三个小时在线观看| 玲央奈 影音先锋| 亚洲视频淫荡小说| 丝袜脚美腿在线| 小偷潜入麻豆航空空姐房间发现空姐在自慰,强上空姐在线观看| 小鸟酱视频h| 天体海滩 ed2k| 国产地址麻豆| 麻豆护士剧情演绎| 国产另类拳交Av在线播放| 一起差差差福利社| 色多网站在线观看| 小青蛙第三季街边搭讪在线| 日本半夜按摩院偷拍黄色网视频| 综合一区 二区| 啪啪逼麻豆| 亚洲制服丝袜久久牛| 深夜另类在线播放| 国产精品午夜免费视频| 91新人淮左刘郎在线播放| 你的露儿老师| 91夂夂夂夂精品国夂夂夂夂| 1024手机基地在线你懂的欧美人妻| 亚洲熟女AV天堂五月天| http://www.lyjgmr.com http://www.acarolinfrank.com http://www.fishingcabins.net http://www.ashevilleflatscreentv.com http://www.prepentretien.com http://www.yurholding.com